CO2 Lance Applicator

Features

• Optimized for simple use
• Telescopic for easy storage
• Day glow and Photo-fluorescent high visibility bands
• Extendable tubular design
• Precision machined by British engineers
• Weather resistant coatings
• 4m to 6m optimal range
• Maximized output of 0.3 Kgs/Second
  
• Safety Shock Absorber
  
• Unique discharge head design
  
• Outer tube insulation technology

Technical Specification

The applicator consists of:

1. A telescopic tube which extends to 3.6m (12 feet approx). To extend the applicator turn the knurled collar anti-clockwise, extend by hand to the require length, ensure the nozzle is in correct alignment relative to the control valve and tighten the collar by turning it clockwise. The outer main tube has a sleeve to protect the operators hands from the effects of cold on discharge.
2. A lever operated control valve is fitted near the base of the outer tube. This calve is spring loaded to the closed position.
3. A discharge head which is a slotted nozzle with a circular back plate, and a three way adaptor, with blank plugs fitted, giving a choice of vertical, horizontal and 45o direction of discharge.

The nozzle can be inserted into an engine bay through the fire access panel, with the back plate forming a cover over the panel to minimize the extent to which the discharged gas can escape from the engine bay. There is also a conical discharge horn which can be screwed on to the discharge head for dealing with other types of fire (e.g. a spill fire on the ground).